DataCard ImageCard Select Guía de usuario descargar pdf (Pagina 20)

2-4 Using the printer

User’s Guide for ImageCard® Select™ and UltraGrafix® Select™ Printers

Loading the print ribbon

The printer uses print ribbon with color panels, continuous color, or color and topcoat.

Full-color ribbon (such as YMCKT) must be Premium ribbon, which uses blue ribbon

spools. Monochrome (one color) ribbon on teal ribbon cores can also be used. (Full-

color ribbon on teal cores cannot be used.)

The type of print ribbon you use must match the print ribbon setting in the driver.

To order new ribbon, contact your service provider. See “Supplies and cards” on

page B-1 for information about ribbons available.

Remove the print ribbon cartridge

1 Lift the top cover, as shown in Figure 2-5.

Figure 2-5: Open the cover

2 Press down on the swing arm until it clicks (step 1 in Figure 2-6). The push latch

releases the swing arm. Lift the swing arm until it is fully open (step 2 in

Figure 2-6).

Figure 2-6: Open the swing arm

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 153 154

Sin comentarios

DataCard ImageCard Select Guía de usuario Pagina 20