DataCard ImageCard Select Guía de usuario descargar pdf (Pagina 54)

4-10

Maintaining the printer

User’s Guide for Express™ and Select™ Class Printers

Be sure that the tabs on the back of the printhead cartridge fit into the notches on

the swing arm spring bar securely (location A in Figure 4-11). Release the latch

lever when the printhead cartridge is in place.

5 Clean the printhead. See “Clean the printhead” on page 4-7.

6 Close the swing arm, pressing it down until the push latch clicks into place.

7 Gently pull the excess printhead cartridge cable out of the top of the swing arm.

8 Remove the ESD strap.

9 Close the cover.

10 Power on the printer.

11 Print a card to verify the quality of printing. You can print a Windows test page or a

card using your card creation application. If card quality is still inadequate, see

“Troubleshooting” on page 6-1.

♦

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 109 110

Sin comentarios

DataCard ImageCard Select Guía de usuario Pagina 54