DataCard ImageCard Select Guía de usuario descargar pdf (Pagina 136)

C-8

User’s Guide for Select™ Platinum Series™ Printers

Set the serial port on Windows XP

1 From the Start menu, choose Settings and then Control Panel.

2 From the Control Panel, choose the System icon.

3 Choose the Hardware tab, and then choose the Device Manager button.

4 Press the "+" next to Ports and double click the Communications Port to open the

Communications Port Properties dialog box (Figure C-5).

Figure C-5: Communications Port Properties dialog box

5 Choose the Port Settings tab.

If the PC has more than one serial port, make sure you view the settings for

the serial port to which the smart card module is attached.

6 Choose the following settings:

7 When the settings are correct, click OK to save settings and close the dialog box.

♦

Setting Value

Baud rate 9600

Data bits 8

Parity None

Stop bits 1

Flow control None

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 154 155

Sin comentarios

DataCard ImageCard Select Guía de usuario Pagina 136