DataCard ImageCard Select Guía de usuario Pagina 93
- Pagina / 155
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Install the printer 7-7
User’s Guide for Select™ Platinum Series™ Printers
If the smart card module uses a USB cable, wait until the driver is installed and a
sample card has been printed before setting up the smart card module.
If your printer has a smart card USB port, see the e-Guide for Select™ Platinum™
Series Printers for information about the files you need before connecting the smart
card USB port and the steps to follow. Use the following procedure if your printer has
one or more serial ports.
Connect an optional smart card serial cable
1 Connect a serial cable to the outside smart card serial port (Figure 7-6) if a
contact smart card module or a contact station is installed in the printer.
The smart card serial cable must be a shielded DB9 serial cable, up to a
maximum of 9.8 feet or 3 meters long.
2 Connect a serial cable to the inside smart card serial port (Figure 7-6) if a contact
module is installed in the printer.
Figure 7-6: Connect the smart card serial cable
3 Use two smart card serial cables if both ports are installed on the printer. (The
smart card module contains both contactless (inside port) and contact (outside
port) couplers.)
4 Connect the other end of the smart card cable(s) to the appropriate port on the
PC. See information for your smart card application for the correct PC port(s) to
use.
5 Verify that port settings are correct. See “PC port settings” on page C-1.
♦
i
i
PC
Printer
- User’s Guide for 1
- Select™ Printers 1
- Regulatory compliance 2
- Trademark acknowledgments 2
- Proprietary Notice 2
- Contents 3
- Overview 7
- About this manual 8
- Audience 8
- About the Select printer 8
- Printer models 9
- 1-4 Overview 10
- Printer features 11
- 1-6 Overview 12
- 1-8 Overview 14
- 1-10 Overview 16
- Using the printer 17
- Tips for success 18
- Loading cards 19
- 2-4 Using the printer 20
- Loading the print ribbon 21
- 2-6 Using the printer 22
- Load the print ribbon 22
- Power on the printer and PC 23
- Ready button 24
- Status light 25
- Making cards 26
- Removing cards 28
- Responding to messages 29
- 2-14 Using the printer 30
- Fix a printer problem 30
- Shut down the printer and PC 30
- 2-16 Using the printer 32
- Using the printer driver 33
- Document Properties 34
- Use the Properties dialog box 35
- 3-4 Using the printer driver 36
- 3-6 Using the printer driver 38
- • Print ribbon type 39
- • Print blocking pattern 39
- • Printer type 39
- 3-8 Using the printer driver 40
- Using the Printer Toolbox 42
- Open the Printer Toolbox 43
- 3-12 Using the printer driver 44
- Exiting the Printer Toolbox 45
- 3-14 Using the printer driver 46
- Maintaining the printer 47
- Running a cleaning cycle 48
- Replace the cleaning roller 49
- 4-4 Maintaining the printer 50
- Cleaning the printer rollers 52
- 4-8 Maintaining the printer 54
- Use the duplex cleaning card 55
- Cleaning tips 56
- Cleaning the printhead 57
- Edge of the printhead 58
- Ground cable 59
- 4-14 Maintaining the printer 60
- 4-16 Maintaining the printer 62
- Troubleshooting 63
- Troubleshooting guide 64
- 5-4 Troubleshooting 66
- Make a printer test card 66
- Printer test card 67
- Windows test page 68
- Magnetic stripe test card 69
- Problems with card appearance 70
- Print module 71
- 5-12 Troubleshooting 74
- 5-14 Troubleshooting 76
- Obtaining service 78
- 5-18 Troubleshooting 80
- Before you install 81
- Installation audience 82
- General requirements 82
- Selecting the site 83
- 6-4 Before you install 84
- 6-6 Before you install 86
- Install the printer 87
- Unpacking the printer 88
- Who to call for assistance 89
- Connecting cables 90
- Connect a USB data cable 91
- 7-6 Install the printer 92
- Installing the printer driver 94
- Installation choices 95
- 7-10 Install the printer 96
- 7-12 Install the printer 98
- 7-14 Install the printer 100
- 7-16 Install the printer 102
- 7-18 Install the printer 104
- Printing sample cards 105
- Setup tips 105
- Setting printer permissions 106
- Changing optional settings 106
- 7-22 Install the printer 108
- Safety and compliance 109
- Liability statement 110
- Acknowledgments 111
- Supplies and cards 113
- Personalization supplies 114
- Supply roll storage 115
- Card specifications 115
- Card quality guidelines 117
- Cleaning supplies 118
- Replaceable cleaning sleeve 119
- Cleaning kits (optional) 120
- Magnetic stripe cleaning card 120
- Duplex cleaning card 120
- Printer driver CD-ROM 121
- Path Purpose 122
- Printer components 123
- Print ribbon cartridge 124
- Card cartridge 124
- Cleaning roller spindle 124
- Data cable 124
- Power cable 125
- Related publications 126
- PC port settings 129
- Set up two ECP parallel ports 130
- Setting parallel port values 133
- Figure C-3: Ports dialog box 135
- Setting Value 135
- • Setting USB port values 137
- • Setting serial port values 137
- Magnetic stripe encoding 141
- Magnetic stripe escapes 143
- Using magnetic stripe escapes 144
- Printer 145
- Manufacturer 145
- Encoding 145
- Syntax Example 145
- TTS (Thrift Third Standard) 146
- NTT character set 147
Relacionado con productos y manuales para Impresoras De Etiquetas DataCard ImageCard Select
(322 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales