DataCard ImageCard Select Guía de usuario descargar pdf (Pagina 51)

Maintaining the printer 4-5

User’s Guide for Select™ Platinum Series™ Printers

6 Slide a new replaceable cleaning sleeve onto the spindle (step 1 in Figure 4-5).

Figure 4-5: Replace the cleaning roller sleeve

7 Hold the replaceable cleaning roller spindle by the ends and remove the

protective cover from the sleeve (step 2 in Figure 4-5). Discard the protective

cover.

Avoid touching the sticky surface of the replaceable sleeve. Oils from your

fingers could reduce cleaning and could affect card quality.

8 Continue to hold the spindle by the ends. Replace the spindle with sleeve in the

printer (step 3 in Figure 4-5).

9 Replace the print ribbon cartridge.

10 Close the swing arm, pressing it down until the push latch clicks into place.

11 Close the printer top cover.

♦

Using the magnetic stripe cleaning card

The printer’s magnetic stripe module should be cleaned when the printer has

displayed several magnetic stripe errors that list running the magnetic stripe cleaning

card as a solution. See “Supplies and cards” on page B-1 for information about

ordering magnetic stripe cleaning cards.

Do not use the magnetic stripe cleaning card more than once every 2000 cards or

excessive wear can result.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 154 155

Sin comentarios

DataCard ImageCard Select Guía de usuario Pagina 51