DataCard SD Series Guía de usuario descargar pdf (Pagina 100)

A-10 SD460 Laminating System

Card Design

Setupyourcarddesignusingyourcardproductionsoftwareoranother

application,suchasMicrosoftWord.Youcanspecifyyourlaminationpreferences

usingtheCardPrinterDriver.Yourcardproductionsoftwarealsomayprovide

laminationsettings.

TheCardPrinterDriverallowsyoutospecifybothprinterandlamination

preferences.Refertoyourprinter’sDriverGuideforcompleteinformationon

settingupprintingpreferencesandlaminationoptions.

• Iftheprinterhasonelaminator,youcanapplytheoverlaymaterialtooneor

bothsidesofthecard.

• Iftheprinterhastwolaminatorsloadedwithdifferentoverlaymaterials,the

quickestwaytoprocessacardistoapplytheoverlayinL1tothefrontofthe

cardandtheoverlayinL2tothebackofthecard.

Youcanfine‐tunethesettingsthatcontroltheapplicationoftheoverlayusing

PrinterManager.Refertotheprinter’sInstallationandAdministrator’sGuidefor

informationonusingPrinterManager.

Verify Setup

Afteryousetuptheprinter,printseveraltestcardstodeterminehowwellthe

laminatorappliestheoverlaytothecard.YoucanprinttestcardsfromtheCard

PrinterDriver(r efertotheprinter’sDriverGuide),fromtheprinterLCDpanel

(referto“PrintaTestCard”onpage 18),orfromPrinterManager(refertothe

printer’sInstallationandAdministrator’sGuide).Youmayneedtoprintmultiple

testcardstomakesuretheoverlayispositionedcorrectly.Thecardstock,the

carddesign,andtheprinter’senvironmentallcanaffecttheappearanceofcards.

Whenevaluatinga

card,makesurethat:

• Theoverlaysarebeingappliedproperly:

• Eachoverlayisappliedcompletelytothecard.

• Thematerialadhereswelltotheedgesofthecard.

• Theoverlaydoesnotcomeoffwhenthecardisbentortwisted.

• Thecardisdebowedcorrectly.

• Theimpressionispositionedcorrectlyandhastheproperdepth.

Ifyouneedtomakeadjustmentstothelaminatororoverlaysettings,refertothe

“PrinterManager”sectionoftheprinter’sInstallationandAdministrator’sGuide.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 106

Sin comentarios

DataCard SD Series Guía de usuario Pagina 100