DataCard SD Series Guía de usuario descargar pdf (Pagina 58)

46 Troubleshooting

The printing is too light

Problem Probable Cause Solution

Photos look faded. The image capture

system needs

adjustment.

Color settings might not be optimal.

Adjust color settings. Refer to the

documentation for the image capture

system, “Color Printing” in your printer’s

Installation and Administrator’s Guide,

and “Color Adjustment Tab” in your

printer’s Driver Guide.

The printing is very light. The ribbon is loaded

incorrectly.

Load the print ribbon correctly. Refer to

“Load the Print Ribbon” on page 20.

The card was

previously printed and

has topcoat on it.

Print only new cards. Refer to “Cards” in

your printer’s Installation and

Administrator’s Guide.

The printhead is not

installed correctly.

Contact your service provider for

instructions to install the printhead

correctly.

The printhead power is

too low.

Log on to the Printer Manager as a

WebAdmin. Open the Printer Settings >

Print menu. Increase the YMCPower

setting, and press the Set Current button

to save your changes.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

Sin comentarios

DataCard SD Series Guía de usuario Pagina 58