DataCard RL90 Guía de usuario descargar pdf (Pagina 35)

Using the LCD menus

RP90 and RL90 User Guide 29

Laminator LCD panel

LCD Display Settings Function

Mode Single

Pass

Default setting; laminates on one side only.

Passes card without laminating.

Film 1-mil

0.6 mil

overlay

Default setting for patch film 1-mil thick.

For patch film 0.6-mil thick.

Use with topcoat with no positioning markings.

Film Position -7 to +7 Adjusts the patch transfer position. Default setting is 0;

the patch moves to the right with a positive value and

to the left with a negative value.

Temp Temperature, default 170° Press the RESET/ key to set temperature from 130°

C to 180° C in 5° increments. Press the ENTER key to

confirm selection.

Speed Lamination speed, default

5.5mm/sec

Press ENTER and use the RESET/ key to set

lamination speed from 4mm/sec to 9mm/sec in

0.5mm/sec increments. The value that can be set may

be limited by the temperature setting. Press the

ENTER key to confirm selection.

Card Fan Off, Low, Half, High, or Full Press the RESET/ key to turn the card cooling fan Off

(default), Low, Half, High, or Full. Press the ENTER

key to confirm selection.

Cool Time 0 (default), 5, 7, or 10

seconds

Press the RESET/ key to select the amount of

cooling time before laminating starts.

Power Save Off, 10, 20, 30 (default), or

60 minutes

Lowers the heater temperature if no lamination has

occurred in the set time period. Preheating

automatically returns when a card enters the

laminator.

LCD contrast 1 to 5 Press the RESET/ key to set the LCD display

contrast from 1 to 5. The larger the number, the higher

the contrast.

Cleaning Without HR Cleans the transport roller only.

With HR Cleans transport and heat rollers. The laminate

cartridge must be removed to clean the heat roller.

See “Cleaning the laminator” on page 36 for more

information.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 74 75

Comentarios a estos manuales

Sin comentarios

DataCard RL90 Guía de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Multifuncionales DataCard RL90