DataCard LM200 Guía de usuario descargar pdf (Pagina 72)

66 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide

Preparing the printer and laminator for transport

Use saved packaging materials to prepare the printer and optional laminator

for transport. Transport includes moving the printer from one location to

another within the same facility.

1 Open the door to the printer. The “Door Open” error message is

displayed.

2 Remove the printer ink ribbon cartridge and remove the ink ribbon from

the cartridge. Replace the empty cartridge into the printer.

3 Remove the retransfer film cartridge and remove the retransfer film

from the cartridge. Replace the empty cartridge into the printer.

4 If present, remove the top and bottom laminate cartridges from the

laminator. Replace the empty cartridges into the laminator.

5 Close the doors to the printer and laminator. Push the Reset key.

6 The “Initialize OK?” message appears. Push the Enter key.

7 The “Film Search” error message is displayed.

8 Set the printer to transport mode using the LCD panel.

9 Power off the printer and laminator.

10 Disconnect the power and data cables from the printer and laminator.

11 Remove cards from the hopper.

12 Remove the output stacker.

13 Allow the unit to cool down before packaging it for transport.

14 Package the printer and laminator in their original shipping cartons.

Note:

When the printer is not in use, turn off the power and cover

the printer with the plastic shipping bag to keep dust and

other debris out of the printer.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 108 109

Sin comentarios

DataCard LM200 Guía de usuario Pagina 72