DataCard LM200 Guía de usuario descargar pdf (Pagina 82)

76 SR200 & SR300 Printer and LM200 & LM300 Laminator User Guide

Mending broken ink ribbon or retransfer film

If the ink ribbon or retransfer film breaks, “Ink Search” or “Media Search” is

displayed on the LCD panel. Broken ink ribbon is shown in the following

example; repairing broken retransfer film uses the same steps.

1 Power off the printer.

2 Open the printer door.

3 Press the eject button for the appropriate cartridge and remove the

cartridge.

4 Trim the ends of the broken portions evenly.

Do not remove the used ink ribbon or film

from the take-up spool.

5 Align the ends of the broken media evenly

and apply tape to secure.

6 Turn the take-up spool counter-clockwise

until the mended portion is wound onto the

spool two or three turns.

7 Make sure the yellow panel aligns with the

arrow on the cartridge.

8 Reinstall the cartridge into the printer until it

clicks into position.

9 Close printer door.

10 Initialize the supplies as described in

“Initialize the ink ribbon and retransfer film” on page 17.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 108 109

Sin comentarios

DataCard LM200 Guía de usuario Pagina 82