DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 117)

Maxsys and MX Series Software Administrator’s Guide 105

Print Process The process used in the printing operation. This selection

should correspond to the selected Ribbon Set. When

Retransfer Print Technology is selected, along with a ribbon

set and print process, the Settings button will be enabled.

The settings for Spot color print process are: dots-per-inch

(600/1200), Y offset, and grayscale enabled. The setting for

CMY and CMYK setting is Use Color Table.

Z-Order Sets the front to back order of elements on the Z axis. Zero (0)

represents the farthest “back” an image can be. For example

if you want image B to overlap image A, image A’s Z-Order

value would be 0 and image B’s value would be 1.

Advanced Tab Properties

Foreground Opacity Opaque or Transparent.

Background

Opacity

Opaque or Transparent.

Rotation The value (in degrees) that the Text Element should rotate

counterclockwise. Click the icon to select Data Field,

Feedback Field, or Runtime Composite information for this

operation.

Foreground/

Background Color

Click Choose Color to open the color picker with which you

can select the foreground/background color(s).

Scale Select the check box, and then click Modify to scale the

image.

You can manually insert Height and Width values based on

the physical size or percentage of the size of the text. Click

the Proportional by Width/Height check boxes to have the

image adjust proportionally based on the Height or Width

value you enter.

Click the icon to select Data Field information for this

operation.

Tab Group Tab Groups allow you to define and manage tab groups.

Each tab group can define up to nine tab stop positions and

also the tab character (any ASCII character) to use. Tab

positions are measured from the card’s lower left corner. If a

tab position is not valid they will not be used. For more

information, refer to “Manage Tab Groups” on page 86.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 117