DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 197)

Maxsys and MX Series Software Administrator’s Guide 185

Chapter 12: Smart Card

Management

This chapter provides information on using the Smart Card

Management tools.

Smart Card Management Tools

Smart Card Management provides tools for configuring the applications, crypto

devices, key cards, key readers, and local master keys used in the smart card

personalization process.

Privileges for this tool may be defined when security is enabled; refer to

Chapter 14: “Security Configuration” on page 203.

The tools are as follows:

• Crypto Device

Management

— Use Crypto Device Management to define

crypto devices and specify which devices are available for use by smart card

personalization applications.

• Key Card Management

— Use Key Card Management to define key card

groups and to assign key cards to groups.

• Key Reader

Management

— Use Key Reader Management to define key

readers, to assign key card groups to key readers, and to specify which key

readers are available for use by smart card personalization applications.

• Lo

cal Master Key Management

— Use Local Master Key (LMK) Management

to define aliases and enter key check values for LMKs.

Getting Started with Smart Card Management

To begin using Smart Card Management, you must first define your application

using Application Management. Note whether or not your application requires

crypto devices or key readers and then complete the following steps.

• If your application requires a crypto device or devices, use Local Master Key

(LMK) Management to enter the LMK alias of each key in a crypto device, and

then use Crypto Device Management to define the crypto devices.

• If your application requires a key reader or readers, use Key Card

Management to define the key card groups and key cards that will be used,

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 197