DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 191)

Maxsys and MX Series Software Administrator’s Guide 179

3. Drag the Pattern Match/Optical Character Verification (OCV) elements to the

virtual card.

4. Define the stock properties as described in the next section.

5. Click Save on the toolbar.

Defining Card Stocks

The stock description details are described in the following tables. Click on the

virtual card to show these parameters.

Parameter Description

General Tab

Description A description of the Card stock

Thickness Thickness (in thousandths of an inch) of the card

Material The material from which the cards are made. Click

Edit to add or edit material descriptions.

Pick Profile Certain card types (SIM, Chip Contact, etc.) may

require special picking. Click Edit to add or edit

pick profile descriptions.

De-bow Distance The distance the card needs to be pushed to

return to a flat state after being processed by

the overlay module.

Transparent Select the check box if this description is for a

transparent card.

MC2 Select the check box if this description is for an

MC2 card.

Titanium MasterCard The Titanium MasterCard cards have a different

shape than typical credit cards (rounded sides).

Select the check box if this description is for a

MasterCard Titanium card. This setting allows the

modules (Magstripe, etc.) to compensate for the

unique card shape.

Mini-Card Select the check box if this description is for a mini-

card. In addition, define the location where the

split is located on the card (i.e. distance of the split

from the leading edge of the card.

Front/Rear Background The image that will be printed on the card. Click

Import to select the image file.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 191