DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 241)

Maxsys and MX Series Software Administrator’s Guide 229

Fi f

As mentioned, the Vision Verification module can use either pre-printed graphics

or characters as a basis for generating the Score. To use a pre-printed graphic you

must identify the graphic with a Pattern Match element on the Card Stock Setup.

To use characters that are always the same, you identify the characters with an

Optical Character Verification (OCV) element on the Card Stock Setup or Card

Setup.

If you are using a Card Stock Setup, you must

capture images of the front and

back of the unpersonalized card stock. To use characters that change from one

card to another, use an Optical Character Verification element on the Card Setup.

Procedures for these tasks are described next.

Quick Stock Capture

This utility allows you to capture the front and back images of card stock. These

captured images can be used to create card stock setups.

Procedure

This procedure must be performed at a Maxsys or MX6000 system equipped

with a Vision Verification module.

1. From the menu bar select Applications | Utilities | Vision Utilities.

2. F

or Output Path, enter or browse to the location where you want card images

stored. Select a folder that is backed up during the normal backup processes.

3. From the Stock Template

list, select a Card Stock Setup that matches the

thickness of the cards you are loading. Selecting Open will open the Card

Stock Setup utility.

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 241