DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 96)

84 Card Setup

2. Enter a unique name for the card in the Name text box.

3. (Optional) Enter a Card Description for the card.

4. F

rom the Card Stock grouping select a Stock Name to use. Click the icon to

the right of the list and then select one of the following:

• Value -

to select a pre-defined Stock Name from the list. Depending on

the Stock Name selected, the Stock Description field may be populated

with the description defined when the Stock Name was created.

• Data Field - to select a data field from which to pull the Stock Name or to

activate the Lookup Setup feature

5. Cl

ick Use Lookup Setup feature to look up the card stock information using

the Stock Name provided in the data stream. To enable this feature the Data

Field must be selected for the Stock Name above.

6. If r

equired, select the Input Station Group from which the card will be picked

and/or the Output Station Group where the card will be placed by selecting

the appropriate check box. For each tray type, click the icons to the right of the

lists and then select one of the following:

• Value -

to select a tray from the list

• Data Field - to select a data field from which to pull the Tray ID

Station groups are defined in the Production Options Setup (refer to

page 148).

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 96