DataCard UltraGrafix Select Manual de instalación descargar pdf (Pagina 127)

Maxsys and MX Series Software Administrator’s Guide 115

Direction Forward or Reverse, the direction on the card the indent

printing is to occur

Secondary Font Japanese users print with two different fonts on the same line

of Emboss or Indent. With Japanese characters, there is a

distinct meaning between characters of different sizes and

one field of emboss data can contain characters that need

different sizes. Without defining a secondary font, either the

default spacing from the primary font is used or the card

setup spacing override is used for both fonts.

Select the Secondary Font check box to enable this option

and then select the font from the list of available system fonts.

Click the icon to select Data Field, Feedback Field, or

Runtime Composite information for this operation.

Preceding

Operations

Click Add/Modify to open the dialog from which you can

select the operation(s) to occur before this operation. Use the

arrows to move the operations from one column to the other.

Ganging Priority

(Maxsys Only)

To improve throughput, indent/emboss operations can be

ganged. Select the priority for the ganging operation from

the list. Number 1 is given the highest priority, None is given

the lowest priority.

Assign Relative

Module (MX Series

Only)

If there are multiple Embossing modules in a system, each

operation defined in Card Setup can be assigned a “relative

module number” to indicate which Embossing module will

carry out the operation. This allows the modules to work

together to increase card throughput.

The MX Series software determines which Embossing module

is capable of performing each operation and assigns the

modules to operations that are not given relative numbers. If

an operation is assigned via relative module number to a

module that is not capable of performing the operation, the

software will attempt to reassign the operation to some other

module. If the reassignment succeeds, card processing is not

interrupted and a warning message is posted in the event

log. If the reassignment fails, the software issues an error.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 321 322

Sin comentarios

DataCard UltraGrafix Select Manual de instalación Pagina 127